Wheels ready
True, tensioned and shod with Vittoria Corsa Control. Ready to go. Continue reading Wheels ready
Category: build
Wheel Tension & Truing
Front and rear wheels laced, tensioned and true. Laterally true to +/- 0.1mm; target +/- 0.5mm Radially true to +/- … Continue reading Wheel Tension & Truing
Wheel Build
Wheel parts came today. Wheels laced and ready for tensioning and truing but it’s too cold down the shed. Miche … Continue reading Wheel Build
Day 5 – bridges, braze ons, finishing
Last day to add the remaining bits and pieces and finish off. I cut the chain stay bridge while Rob … Continue reading Day 5 – bridges, braze ons, finishing
Day 4 – rear triangle
Lovely commute. We started off by brazing the chain stays into the bottom bracket. The seat stays were then cut … Continue reading Day 4 – rear triangle
Day 2 – mitres
We started off tidying the front dropouts by filing the dropouts and tapering the point down towards the fork blades. … Continue reading Day 2 – mitres
Brazing clean up
A bit more from yesterday. Continue reading Brazing clean up
First Day
10 o’clock start on the first day. The bike shop is closed on a Monday so it was just Rob … Continue reading First Day